• Condividere :

  • in
  • https://www.facebook.com/profile.php?id=100031871989158
  • g
  • y
  • t
Ricerca
Casa / Ricerca
  • rinforzato in fibra di vetro lungo polipropilene
    fabbrica di vendita calda pp con colore di fibra di vetro lungo nero
    materiali compositi in fibra di vetro pp polipropilene fibra di vetro lungo in polipropilene omopolimero è polimerizzato da un monomero di propilene singolo, con alta cristallinità, buona resistenza meccanica e resistenza al calore.
    vedere di più
  • PP-NA-LGF30
    LFT-G PP Polifenilene compound Resina termoplastica a fibra di vetro lunga disponibile campione colore originale
    PP fill Long glass fiber Advantages of glass fiber reinforced PP material in modified PP material. 1、The heat resistance temperature of glass fiber reinforced PP is much higher. 2、The shrinkage of glass fiber reinforced PP decreases a lot, and the rigidity is greatly improved. 3, glass fiber reinforced PP plastic, will not stress cracking, impact resistance improved a lot. 4、After glass fiber reinforced, the burning performance of PP plastic is reduced a lot. 5、After glass fiber reinforcement, the strength of PP is improved, such as: tensile strength, compressive strength, bending strength. The disadvantages of glass fiber reinforced PP material in modified PP material. 1、After glass fiber reinforcement, the transparency of the material decreases. 2、After glass fiber reinforced, the toughness of PP decreases and the brittleness increases. 3、After glass fiber reinforced, the hygroscopic property of PP is greatly enhanced, therefore, it should be dried when injection molding. 4、After glass fiber reinforcement, the melt viscosity of PP increases, the fluidity becomes worse, and the injection pressure increases a lot. 5、After glass fiber reinforcement, the fluidity of PP material is poor, and the injection temperature of reinforced plastic is increased by 10℃-30℃. 6、After glass fiber reinforced, attention should be paid to the surface corrosion treatment and surface hardness treatment of the equipment. 7、After glass fiber reinforcement, during the injection process, glass fiber can enter the surface of plastic products, making the surface of the products become rough. It is necessary to use the mold temperature machine to heat the mold when injection molding, so that the plastic polymer can enter the surface of the products and obtain a higher surface quality. TDS for reference only We have general grade, heat-resistance grade, UV-resistance grade, toughen-resistance grade for you to choose. Application General grade: Car parts, washing machine parts, water pump parts, water treatment components, furniture parts, etc. Heat-resistance grade: Car front and back module, water tank frame, battery bracket, engine cover, skylight frame, etc. UV-resistance grade: Car handle, car mirror parts, battery case, truck outside pedal etc. Grado di resistenza indurito: utensili elettrici, guscio della pompa, raccordi per tubi ecc. LGF VS SGF Fa domande frequenti D. La fibra di vetro lunga e l'iniezione di fibra di carbonio lunga hanno requisiti speciali per le macchine e gli stampi per lo stampaggio a iniezione? R. Ci sono sicuramente dei requisiti. Soprattutto dalla struttura di progettazione del prodotto, così come l'ugello a vite della macchina per lo stampaggio a iniezione e il processo di stampaggio a iniezione della struttura dello stampo devono considerare i requisiti della fibra lunga. D. Le cause e le soluzioni per fibre galleggianti per prodotti in fibra di vetro lunga e fibra di carbonio lunga. R. A causa della bassa temperatura del sol o della bassa temperatura dello stampo e della bassa pressione di stampaggio ad iniezione, la fibra di vetro e la resina non possono essere ben compatibili e diffuse. La temperatura irregolare dello stampo superficiale dello stampo causerà il problema della fibra galleggiante e può essere risolto aumentando la temperatura del sol, la temperatura dello stampo e la pressione di iniezione. D. Il PP rinforzato con fibra di vetro lunga ridurrà la tenacità del materiale e aumenterà la fragilità. C'è un modo per risolvere questo problema? R. La fibra di vetro lunga e la fibra di carbonio lunga miglioreranno notevolmente l'impatto e la resistenza alla trazione del substrato.
    vedere di più

un totale di 1 pagine

notiziario

-- ricevi aggiornamenti con gli ultimi argomenti

Copyright © 2015-2024 Xiamen LFT composite plastic Co.,ltd..Tutti i diritti riservati.

Casa

Prodotti

 notizia

contatto